I-Appliance BBS
The Official Source for Internet Appliance Upgrades and Mods

Click Here!
BBS Main List | Sign In | Sign Up | Search | Help | Linux-Hacker.netReply to Thread | Printer |

Home / Other I-Appliances / 3Com Audrey
So, where do I get this macparse.exe file? Please!

New MessageSo, where do I get this macparse.exe file? Please! (modified 0 times) RossVTaylor
Profile | Email
Sorry, but I've got an Audrey on the way and I bought a Netgear EA101c today. I've spent hours searching this and the Audrey Hacking site (even HomeSeer's site) but I can't find the download location for the macparse program that every set of instructions refers to. It's *not* in the qtools files I downloaded. With the proper bin file, I could use the qtexercz program, but I haven't located the Netgear bin file either.

The closest I've come to finding macparse was a post on this forum asking the same thing, but in the next post the originator said "oh, I found it" but didn't say where! I'm feeling pretty stupid right now!

Thanks for your help,

Ross

02-03-2002 00:06:08

New MessageRE:So, where do I get this macparse.exe file? Please! (modified 0 times) adam714
Profile
http://www.klsi.com/drivers/index.htm
02-03-2002 11:21:37

New MessageRE:So, where do I get this macparse.exe file? Please! (modified 0 times) RossVTaylor
Profile | Email
Uh, actually that's the download link listed in the instructions and, if you try to download the qttools.zip file from that location it really sens you qttoolsinstall.exe (or something similar). That set of installed files *doesn't* include macparse. That was my problem. Time to change the instructions, I guess.

A user on the Homeseer site pointed me to:

http://www.klsi.com/drivers/

This location has the actual qttools.zip file including macparse.

Hope this helps someone else.

Ross

02-03-2002 20:57:35

New MessageThere's been a change, apparently. (modified 0 times) RossVTaylor
Profile | Email
Yup, the files we all need are now at the link I posted above. They're *not* at the link listed in the instructions.

With the correct .ini file and the macparse program, my EA101c mod took all of three minutes.

Ross

02-03-2002 21:33:01

New MessageRE:So, where do I get this macparse.exe file? Please! (modified 0 times) nhan
Profile
I had downloaded the qttoolsinstall.exe (QtTools) following the above mentionned URL. After un-compress and install it, I found no MACParse.exe. The search engine on that site could not find that file neither. There is no other QtTools on that site. Please Help.
02-28-2002 11:11:58

New MessageRE:So, where do I get this macparse.exe file? Please! (modified 0 times) nhan
Profile
Found it at http://www.klsi.com/drivers/device_drivers/qttools.zip
02-28-2002 13:53:09

New MessageRE:So, where do I get this macparse.exe file? Please! (modified 0 times) Sawadee
Profile
I just found NetGear EA101C network adapters for $9 again (Plus shipping) at
http://www.emicrox.com/
Search for EA101C

Shipping for 3 units was $8.70

01-16-2003 10:11:26

New MessageRE:So, where do I get this macparse.exe file? Please! (modified 1 times) manaheim
Profile
Hmmm... I'm betting those instructions that were incorrect were mine?

(http://www.3rdmoon.com/crusso/audrey )

Anyway, if so, I corrected it. :)

Yes, I'm back and paying attention to my site again. Sorry, been quite busy.
(yes, this is cokeguy)

01-21-2003 09:07:21

Reply to Thread | Printer |
All times are PSTPowered by UltraBoard v1.62



Copyright © 2000, Netmake Inc. All Rights Reserved.
See Terms and Conditions for more information.




i-opener opener laptop notebook computer help drivers dll free windows dos repair fix linux mac macintosh 2000 95 98 nt pc configure hardware software sound video netscape explorer network networking lan wan software cmos fat bios printer card mouse modem ide scsi cd rom controllers scanner tape hard drive cgi scripts source code mp3