I-Appliance BBS
The Official Source for Internet Appliance Upgrades and Mods
Click Here!
BBS Main List | Sign In | Sign Up | Search | Help | Linux-Hacker.netReply to Thread | Printer |

Home / Other I-Appliances / 3Com Audrey
macparse.exe could not read I2C

New Messagemacparse.exe could not read I2C (modified 0 times) cs668
Profile
I have done all of the things needed to get my LinkSys USB10T working with macparse.exe

The driver installs fine and shows up as working when I check in the device manager.

But, when I run macparse.exe I get an error when I press the read eeprom button. The error is simply output in the textbox on the left off the screen along with a lot of other info that is all at 0.

It simply says "Could not read I2C"

Any suggestions.

02-21-2002 08:11:28

New MessageRE:macparse.exe could not read I2C (modified 0 times) Javamahn
Profile
Sounds like you need to reflash the eprom the with linksys.bin file. You can find the file at http://www.linux-hacker.net/downloads/linksys.bin
02-21-2002 10:50:06

New MessageRE:macparse.exe could not read I2C (modified 0 times) cs668
Profile
Thanks for the advice, but it did not help.

It claimed to write the new eeprom and the new vendor/product id. Then when I tried to read it back I got the read error.

I took it to my linux machine and read the info from it, but it had not changed the vendor/product id.

I would apreciate any suggestions.

02-21-2002 23:19:03

Reply to Thread | Printer |
All times are PSTPowered by UltraBoard v1.62


Copyright © 2000, Netmake Inc. All Rights Reserved.
See Terms and Conditions for more information.




i-opener opener laptop notebook computer help drivers dll free windows dos repair fix linux mac macintosh 2000 95 98 nt pc configure hardware software sound video netscape explorer network networking lan wan software cmos fat bios printer card mouse modem ide scsi cd rom controllers scanner tape hard drive cgi scripts source code mp3