| If you don't know the correct size of your CF card and if you are getting the "FATAL - Invalid Image" error message while trying to flash the Audrey, then here is what you do.
connect your audrey to a windows PC using a null modem cable. Fire up Hyperterminal on your windows pc and make sure you have the the correct port settings.
57600,8,none,1.
Now, try to boot from the flash again. When audrey tries to boot from the CF, it'll spit the CF information onto its serial port and you'll see that on your hyperterminal screen.
***********
3Com IPL
XLv01.12
========
Loading from CompactFlash
Config : 0000848A
Sector sz: 00000210
Capacity : 0000F800 <-------
Not compressed
File size: 00FC0000
max_sectors: 00007E00
Sum (calculated): 4DB485CB
Sum (stored): 4DB485CB
Uncompressed len: 00FC0000
Image download complete
Scanning for Image at 00400000
Image at: 00400414
Image setup
Starting image
**************
The capacity field above shows the size of my CF card in HEX which is F800. Using the windows Calculator i found out the decimal equivalent of F800 which is 63488.
Muitiply this with 512 and you'll get the correct size of your CF card. 63488 x 512 = 32505856 bytes.
Hope this helps | |
