I am hoping someone can shed some light on a problem I am having. My Audrey does not want to power up.
I have checked the PS and it is outputting 3.4 and 5.15 v
on the pins of the connector
according to the pinout on the power supply the connector has the correct voltages 3.4 pins 1,3,6 and 5.15 on pins 4, 7.
these voltages are measured using the circular shield as ground.
I have seen in other posts that 3.3 and 5 are the voltages needed. So it looks like the supply is OK.
I then disassembled the audrey and checked the connections for loose or unsoldered points but found nothing.
this unit came to me from a friend and he only used it for a short time and it was working when he put it back in the box.
Any ideas as to where the problem lies?