I'm burning new image to the CF on Audrey and want to verify that it works before I flash Audrey with the new Image. Is there a way to boot Audrey from an image on the CF?
I have tried to hold down the calander (upper right button) while booting and get the following from the serial port.
3Com IPL
XLv01.08
========
Loading from CompactFlash
Config : 0000848A
Sector sz: 00000200
Capacity : 0000F600
Not compressed
File size: 00FC0000
max_sectors: 00007E00
Sum (calculated): CD09B942
Sum (stored): 00000000
Uncompressed len: 00FC0000
Action : 00000000
Image download complete
Scanning for Image at 00400000
Image at: 00400414
Image setup
Starting image
But this seems to be the same image that is in Audrey, not the new one that should be on the CF. I'm I doing everying right and something else is messed up?
I don't know if this matters or not but I've mounted a drive from a PC to Audrey and verified that works. Then I use cat /mnt/image.cf > /dev/cf to get the new image on to the CF card. Does that sound correct also? I should not have to do anything else to erase the flash right?
Thanks!
