I-Appliance BBS
The Official Source for Internet Appliance Upgrades and Mods
Amazon Honor System Click Here to Pay Learn More
BBS Main List | Sign In | Sign Up | Search | Help | Linux-Hacker.netReply to Thread | Printer |

Home / Web Pads / Epods One General Post
Need some help Hacking

New MessageNeed some help Hacking (modified 0 times) EpodsTeen
Hey, my name is Derek and I thought that some of you people could help me out. I am using the geocities.com/epodsfiles website as a basic guide.
I have a question though. I really at this point am not worried about putting Win CE files on the epod, I am just interested in the internet capabilities of the unit using my own ISP. Do I need any other modem cards or anything or is the modem that the company sent fine, and will it work? Does anyone know of any complications with the hack information provided by hackyourepod? Thanks.

Derek

02-18-2001 13:11:21

New MessageRE:Need some help Hacking (modified 0 times) TeddyBear
Nothing else is needed, but a little time and patience.
02-18-2001 13:44:17

New MessageDial-Up (modified 0 times) SiliconIce
Yes...patience is needed to dial up, my ISP takes 5 to 10 attempts to get on...

But it's a CHEAP one so I guess I get what I pay for, it's only $4.99 a month.

02-18-2001 14:07:27

New MessageRE:Need some help Hacking (modified 0 times) epodteen
Has anyone had any problems with the hacking of the epod using the information that Randy has provided at /www.geocities.com/epodsfiles/ ? Does it make any difference if I have had a service account with Epods? I had service until they went under. That won't complicate anything right?

So, what do I skip if I don't want the ability to add Win CE files to the Epod? Is it difficult to set it up to accept win ce files? ( I mean the transfer of the files, etc.) Thanks for the help...

Derek

02-18-2001 15:11:23

New MessageRE:Need some help Hacking (modified 0 times) Pete
If you are used to the slow dial up speed with the EPODs ISP then switching to another will not make much of a difference. The 1.x hack is harmless and all you need to do is cold boot your epod to bring it back to an original state. Best thing is add memory externally with a card so you have more storage. Bring up colors to 16 bit. And maybe later on hack the internal memory to 32 megs from 16. Even better is to make it a terminal client and with that you can surf a lot faster.
02-18-2001 17:54:09

New MessageRE:Need some help Hacking (modified 0 times) Epodsteen
Great advice.... like I said before, have any complications been found in the hacking of the epod? Will I have a Windows CE device after performing the hack? I mean, will it look similar (taskbar.) to pocketPC units?

How long is the hacking supposed to take? I will start working on it tomorrow, and hopefully have it done tomorrow evening.

Derek

02-18-2001 18:30:16

New MessageRE:Need some help Hacking (modified 0 times) Pete
No problems with the 1.x hack. Yes with the 2.x hack...do a search in the message threads for more info. I don't how close the 1.x hack is to real CE. I only know the Epod CE. I have a Palm Pilot. Think its some MIPS custom variant of CE written for Epods buried within the read only eprom.
02-18-2001 20:30:51

Reply to Thread | Printer |
All times are PSTPowered by UltraBoard v1.62



Copyright © 2000, Netmake Inc. All Rights Reserved.
See Terms and Conditions for more information.




i-opener opener laptop notebook computer help drivers dll free windows dos repair fix linux mac macintosh 2000 95 98 nt pc configure hardware software sound video netscape explorer network networking lan wan software cmos fat bios printer card mouse modem ide scsi cd rom controllers scanner tape hard drive cgi scripts source code mp3