I-Appliance BBS
The Official Source for Internet Appliance Upgrades and Mods
Click Here!
BBS Main List | Sign In | Sign Up | Search | Help | Linux-Hacker.netReply to Thread | Printer |

Home / Web Pads / Fujitsu Stylistic 1200
1200 Inernal Display
Display not working

New Message1200 Inernal Display (modified 0 times) monte
Profile
I recently bought a used 1200 in very good condition. There is no O/S installed. When it starts, nothing is displayed. However, when I use an external monitor, I get the expected message for having no O/S. Do I have a bad unit or will the LCD not work until I install an O/S. I am waiting for my 2.5 to 3.5 adapter to arrive to install 95/98


thanks

12-18-2003 18:32:33

New MessageRE:1200 Inernal Display (modified 0 times) YouBecha
Profile
Go into the bios...F1 I think (or F2 or DEL) and see what display is listed.

The bios will drive the LCD.

If you have no display, it could be the LCD or the backlight or both.

If your pen works, you can tap the ICON at the bottom of the screen next to the speaker volume up button to change the video output.

http://www.geocities.com/mr_bubba_zanetti/
12-20-2003 10:51:14

New MessageRE:1200 Inernal Display (modified 0 times) monte
Profile
thanks, it was the contrast. I got NT installed, but now I'm searching for some pen drivers
12-20-2003 19:21:32

New MessageRE:1200 Inernal Display (modified 0 times) YouBecha
Profile
I never found any way to use the pen with win2k...never thought about using NT drivers.
12-21-2003 07:30:20

New MessageRE:1200 Inernal Display (modified 0 times) Scoth
Profile
I've never had any luck getting the NT4 drivers working on Win2k or XP for a 1200 or 2300. Since Win2k/XP dropped the 'Have Disk' button on the Windows Setup tab, even getting it installed took hacking the sysoc.inf file . I did actually manage to get it installed, but it didn't work. I think it's because there's still no driver for the digitizer, at least on the 2300.

I haven't played with my 1200 in awhile though, it may well work. I've been wanting to try www.v-tablet.com's stuff now that I know more about the 2300's digitizer, but haven't had a chance as I've gone Linux on my tablets.

Scott

01-11-2004 14:57:05

New MessageRE:1200 Inernal Display (modified 0 times) mitch_hf
Profile
This is a new question:
Does anyone know a way to turn the backlight off (I have the Transmissive display) without turing the display completely off (i.e. standby)

I'm trying to use the device in my car but the light from the screen is pretty distracting.
Cheers

02-14-2004 10:35:09

New MessageRE:1200 Inernal Display (modified 0 times) wanderer
Profile
>mitch_hf

You can set the backlight level with the touchpads on the far right. You could also set the video timeout to 30 seconds (in BIOS or with PM} and bring it back with a pen click.

RecycleSave@aol.com
02-14-2004 12:34:14

Reply to Thread | Printer |
All times are PSTPowered by UltraBoard v1.62


Copyright © 2000, Netmake Inc. All Rights Reserved.
See Terms and Conditions for more information.




i-opener opener laptop notebook computer help drivers dll free windows dos repair fix linux mac macintosh 2000 95 98 nt pc configure hardware software sound video netscape explorer network networking lan wan software cmos fat bios printer card mouse modem ide scsi cd rom controllers scanner tape hard drive cgi scripts source code mp3