I-Appliance BBS
The Official Source for Internet Appliance Upgrades and Mods
Click Here!
BBS Main List | Sign In | Sign Up | Search | Help | Linux-Hacker.netReply to Thread | Printer |

Home / Web Pads / Fujitsu Stylistic 1200
please help me with pen under linux

New Messageplease help me with pen under linux (modified 0 times) mlau
Profile | Email
If anyone out there has any prior experience or knowledge of how to get the pen to work under Linux I'd greatly appreciate it. I feel that I'm so close and I'm not sure exactly what's holding me back. Trying the setserial commands in the new order suggested a while ago still did not patch things up. My problem is, when I set the port to 0xfce8, I get an input/output error. When I set it back to 0x02e8, the default setting for ttyS3, IRQ 3, it doesn't respond when I try to do a 'cat'. I tried setting it to IRQ 15 but no go either. I don't know how to go about fixing this so if anyone, please, post anything at all which you think would be of help, I'm thanking everyone in advance.

PLEASE HELP ME I'M GOING INSANE!

07-06-2001 10:37:41

New MessageRE:please help me with pen under linux (modified 0 times) razalasm
Profile
this works for me ... remember when you 'cat /dev/ttyS3' it may take quite a bit of pen motion before something shows up on the screen due to buffering:
============================
fuji1200:~# cat penSetup.sh
setserial /dev/ttyS3 irq 15 port 0xfce8
setserial /dev/ttyS3 autoconfig
setserial /dev/ttyS3 irq 15 baud_base 115200
fuji1200:~#
============================
It's probably redundant, but who cares?
07-06-2001 12:52:21

New MessageRE:please help me with pen under linux (modified 0 times) mlau
Profile | Email
0xfce8 won't work ...
07-08-2001 09:06:14

New MessageRE:please help me with pen under linux (modified 0 times) razalasm
Profile
Your reply is brief to the point of being unhelpful. I assume you mean to say "I tried entering the 3 'setserial' commands _exactly_ as given, and then I did a 'cat /dev/ttyS3'. It gave an I/O error". If this is not the case please say so.

Otherwise it would be helpful to know the configuration of your 1200 ... do you have any PCMCIA cards inserted, what are the BIOS setting for COM1,2?

07-08-2001 10:31:33

Reply to Thread | Printer |
All times are PSTPowered by UltraBoard v1.62


Copyright © 2000, Netmake Inc. All Rights Reserved.
See Terms and Conditions for more information.




i-opener opener laptop notebook computer help drivers dll free windows dos repair fix linux mac macintosh 2000 95 98 nt pc configure hardware software sound video netscape explorer network networking lan wan software cmos fat bios printer card mouse modem ide scsi cd rom controllers scanner tape hard drive cgi scripts source code mp3