This could be a solution for a serial interface to the JuiceBox, and it is small
enough ... it could (maybe) fit into the unit. Or small enogh it could fit into
a small incloseure and we could pass the serial lines out through a 3.55mm stereo
audio connector from the JuiceBox. FTDI also has a solution for JTAG over USB ...
Thanks
sfranzyshen
01-25-2006 17:39:29
RE:JuiceBox as a USB peripheral (modified 0 times)
I am leening toward something more like this then installing a circut inside the JuiceBox.
Two resons for this are;
We can use the same setup for other projects like the cuecat idea
We can use the host USB to power the unit.
Ok, to start we need to bring the UART TX & RX lines and power (gnd, vcc) out of the JuiceBox. I think using a chassis mount 4 conductor 3.5 mini audio jack will work. These connectors have 4 conductors instead of the normal 3 conductor (stereo) connectors. They are used where the stereo lines (LT, RT, GND) and the mic lines (MIC, GND) are passed thru the same connector. Neat! we can use them here! 4 conductor 3.5 mini audio jack 4 conductor 3.5 mini audio plug
I found them online for <$3 Here for the Jack and Here for the Plug
i-opener opener laptop notebook computer help
drivers dll free windows dos repair fix linux mac macintosh 2000 95 98 nt pc
configure hardware software sound video netscape explorer network networking
lan wan software cmos fat bios printer card mouse modem ide scsi cd rom
controllers scanner tape hard drive cgi scripts source code mp3