I-Appliance BBS The Official Source for Internet Appliance Upgrades and Mods BBS Main List | Sign In | Sign Up | Search | Help | Linux-Hacker.net Reply to Thread | Printer |

Home / Web Pads / Panasonic CF-01 Any ideas on protecting the screen on CF-01? Any ideas on protecting the screen on CF-01?

Any ideas on protecting the screen on CF-01? (modified 0 times) BigDick Profile Subject says it all. 06-06-2001 06:36:28

RE:Any ideas on protecting the screen on CF-01? (modified 0 times) JunkLeo Profile check the thread in 1200 http://www.linux-hacker.net/cgi-bin/UltraBoard/UltraBoard.pl?Action=ShowPost&Board=FujitsuStylistic1200&Post=13&Idle=0&Sort=0&Order=Descend&Page=0 I bought 10 packs from vsps.com for 1200 and plan to cut one for CF-01. After I receive the package, I will post the verdict. 06-06-2001 07:19:18

RE:Any ideas on protecting the screen on CF-01? (modified 0 times) JunkLeo Profile Just got the screen protectors and 1200 today (thanks Ryan and Jim, and yes, it also missed the I/O panel). I installed it on my 1200 and CF-01, I used the pencil to copy the curve of the CF-01 left side screen and cut it. Installation is a little bit tricky, I still got some small bubbles but both pens are working fine. Definitely it is a must-buy for CF-01 or 1200 owners. BTW you also can cut it for your Palm or PocketPC. I'm too dumb to spend another $10 for the Palm screen protectors :(. 06-06-2001 22:42:00

RE:Any ideas on protecting the screen on CF-01? (modified 0 times) BigDick Profile JunkLeo, What are the sizes of the sheets and will they also fit an ePods? Dickie 06-07-2001 05:50:02

RE:Any ideas on protecting the screen on CF-01? (modified 0 times) JunkLeo Profile I don't have it handy now(I'm working, you know). Anyway the height is about the 1200 screen height, the width is 1 cm shorter than the screen width(which there is a margin between usable area and the frame. 1200 screen is 8" + hot pods and epod is 8.2", I will say "too close to call." I will post the protector dimension tonight. BTW anyone buy the genuine 1200 screen protectors, and what is the price? 06-07-2001 07:34:16

RE:Any ideas on protecting the screen on CF-01? (modified 0 times) JunkLeo Profile OK, the size is 5 5/16" x 7" 06-07-2001 19:21:48

RE:Any ideas on protecting the screen on CF-01? (modified 0 times) GuyMontag Profile I just used transparancy film and cut it out a little larger than the visible screen area, messed around with it, trimmed it, slipped it in. Cost to me = free since we have tons of the stuff at work. 06-08-2001 11:35:46

RE:Any ideas on protecting the screen on CF-01? (modified 0 times) JunkLeo Profile Using transparancy film is some idea, but my fingerprints won't remain on the screen protector. I don't think transparancy film can prevent fingerprints, otherwise no one will buy screen protectors. Too bad they only sell 10 packs, the screen protector is worth $2.5 to me. 06-08-2001 11:46:41

RE:Any ideas on protecting the screen on CF-01? (modified 0 times) CoolMaui Profile JunkLeo- Would you want to sell some of your extra screen protectors that you got in that 10 pack from vsps.com? (I'm thinking 3 to 4 bucks a piece) I would never need all 10. CoolMaui 06-08-2001 13:07:25

RE:Any ideas on protecting the screen on CF-01? (modified 0 times) JunkLeo Profile CoolMaui, It is hard decision for me to sell the rest of screen protectors because I have Cf-01 and 1200, and it can be used for other devices. Maybe you can find someone here willing to split the cost(i.e., 5-5, 3-3-4, or 2-2-2-2-2,BTW it is free shipping from vsps.com). I recommend it to everyone because I don't have to worry about the scratch and no fingerprint on the screen now. 06-08-2001 14:49:31

RE:Any ideas on protecting the screen on CF-01? (modified 0 times) JunkLeo Profile Just let you guys know - I cut a piece of screen protector and put it on my Sony Cyber-shot LCD, and it is PERFERT. No fingerprint on LCD anymore. 06-08-2001 20:07:59

RE:Any ideas on protecting the screen on CF-01? (modified 0 times) BigDick Profile Does anyone know of a screen protector product that comes in a size that can be cut to fit both a CF-01 and an ePods? Dickie 06-16-2001 21:48:34

RE:Any ideas on protecting the screen on CF-01? (modified 0 times) BigDick Profile Do the VSPS screen protectors have any adhesive? I'd like to use them on ePods and CF-01 and based on the reported size above, they should fit bot units. Dickie 06-18-2001 10:55:39

RE:Any ideas on protecting the screen on CF-01? (modified 0 times) JunkLeo Profile VSPS screen protectors can stick on the screen without tapes. I don't know there is adhesive or not, if so, it would be very light because you can redo the installation by peeling it off. BTW before you install it, clean the screen and make sure there is no fiber or dust on it, otherwise it is hard to remove it after put the protectors on (fiber will stick on the protectors ). 06-18-2001 13:55:14

RE:Any ideas on protecting the screen on CF-01? (modified 0 times) BigDick Profile What is safe to clean CF-01 and ePods screens with? 06-19-2001 06:03:12

RE:Any ideas on protecting the screen on CF-01? (modified 0 times) JunkLeo Profile I used Ethyl Rubbing Alcohol and 100% cotton cloth. I didn't check the manual, I guess as long as there is no coating on the screen, it is ok using Alcohol. Using water should do it if the screen is not too greasy (not under the tap of course). 06-19-2001 07:27:03

RE:Any ideas on protecting the screen on CF-01? (modified 0 times) CoolMaui Profile I picked up a 10 pack of the vsps.com screen protectors, and they work great!!! The hardest part is cutting the sheets to fit the CF-01 screen.... but the great part is if you mess up, you can redo it..... :) Anyway, I do have about 6 extra sheets to sell if anyone is interested in some of them (I would never use all 10), and it would keep someone from forking over $25 for a set. If you are intersted, contact me. Nate CoolMaui@yahoo.com 07-06-2001 11:15:35

RE:Any ideas on protecting the screen on CF-01? (modified 0 times) BigDick Profile CM, How did you manage to cut to fit? dickie 07-06-2001 15:40:47

RE:Any ideas on protecting the screen on CF-01? (modified 0 times) BigDick Profile CM, How did you manage to cut to fit? dickie 07-06-2001 15:40:49

RE:Any ideas on protecting the screen on CF-01? (modified 0 times) CoolMaui Profile I just used a ruler to get the hight and width, then just traced around the curve on the left side of the screen to get the rest. Worked great!!! 07-06-2001 18:06:27

Reply to Thread | Printer | All times are PST Powered by UltraBoard v1.62

I-Appliance BBS General - NEWS, Breaking NEWS - linux-hacker.net BBS on CD Questions - User Groups in Your Town - E-Bay, Yahoo Auction LINKS ONLY (MODERATED) - Jokes & Humor - usdtv box I-Opener Areas - I-Opener General Posts - I-Opener Technical Stuff - I-Opener Technical Info Reference (MODERATED) WebSurfer Areas - WebSurfer General Posts - WebSurfer Technical Stuff - WebSurfer Technical Info Reference (MODERATED) Other I-Appliances - Virgin Webplayer - WebPal - MailStation - 3Com Audrey - ThinkNIC / Oracle NIC - Gateway/AOL Connected Touch Pad - Philips/AOL-TV - ACER NT-150 STB - MSN Companion - Compaq IA - Emachines IA - IBM NetVista IA - Intel dot.station - MSNTV2 Network Computers - Fujitsu-Siemens Scovery Linux Net Computers - GallantWeb Server Consoles - Dreamcast - xbox hacking Web Pads - Epods One General Post - Panasonic CF-01 - Fujitsu Stylistic 1200 - Cybiko Thin Clients - Thin Clients DigitalVideoRecorders - DTV Recorders, Replay, TiVo, Etc... - Tivo Hacks Linux - Midori Linux General Board - ITX MotherBoards Single Board Computers - Earth Computers mARMalade Elite Member Area MISC Areas - The Swap Meet WE TAKE NO RESPONSIBILITY FOR ANY TRANSACTION HERE AND NO COMMERCIAL POST PERIOD !!! - Wireless Net - Cameras - Robotics - Routers/Gateways - Mattel JuiceBox