I-Appliance BBS
The Official Source for Internet Appliance Upgrades and Mods
Click Here!
BBS Main List | Sign In | Sign Up | Search | Help | Linux-Hacker.netReply to Thread | Printer |

Home / Thin Clients / Thin Clients
Netier IRQ conflict
Conflict between Via bus master IDE and Video Card

New MessageNetier IRQ conflict (modified 0 times) hod1
Profile
I have installed Windows 98 SE using the drivers provided by Wyse for the video card, NIC, and soundcard. Device manager is showing a conflict between the IDE driver and the display card. I believe they are both trying to use IRQ 15. Has anyone run into this and found a solution? This is the hardware that is built into the motherboard so there has to be a way to make them play together nice.

Thanks

07-10-2002 08:37:16

New MessageRE:Netier IRQ conflict (modified 0 times) stretch
Profile | Email
Hod1 : I think you have to disable the secondary ide in the bios setup to resolve the conflict.
07-10-2002 09:03:43

New MessageRE:Netier IRQ conflict (modified 0 times) hod1
Profile
I already had the second Ide disabled and that did not work. I did get it to work however, I changed the bios PnP settings to manual and marked IRQ 15 as legacy. That forced the video card and IDE controller to select alternate settings and they do not conflict. I also disabled the DOC to remove the compatability mode problem. My DOC is only 16meg anyway so no great loss.

-Hod

07-11-2002 09:03:10

Reply to Thread | Printer |
All times are PSTPowered by UltraBoard v1.62


Copyright © 2000, Netmake Inc. All Rights Reserved.
See Terms and Conditions for more information.




i-opener opener laptop notebook computer help drivers dll free windows dos repair fix linux mac macintosh 2000 95 98 nt pc configure hardware software sound video netscape explorer network networking lan wan software cmos fat bios printer card mouse modem ide scsi cd rom controllers scanner tape hard drive cgi scripts source code mp3