| When I originally installed WinME on my GTC, I mistakenly used the Win9X drivers from Gateway for the HPNA Combo Card and Outboard Modem. Today when I installed the WinME drivers, the Control Panel showed a new entry for the HPNA 10MB card under Network Adapters, and a new category for PCI Card that contained a V90 modem. So I powered down and yanked the standalone modem card out, restarted, and lo and behold I still had a functioning modem via the miniPCI card. So I guess you don't have to file down the edge of the modem card to get the cable to fit, just pull the modem instead. This will also give me the entire area where the modem card was to install a HD, so no need to do anything with trimming the heatsink as I originally thought. And with a little judicious nibbling of the stand support bracket angle under the RF shield, I can fit my current 12.5mm drive in no problema. Ah, life is good. But this sucker still seems to run a lot slower than my stock Rise CPU iO with 64MB, what's up with that?
B'Dog | |