Yes, the keyboard is the one near the modem chip. It is the little white fella. The pinout is:
1 => KBDAT
2 => GND
3 => KBDCLK
4 => +5V
You will have to solder a header for the VGA connector. It is the 6 pin above where the video chip is located. Just a little above the middle of the HD. Pinout is as follows.
1 => R
2 => G
3 => B
4 => GND
5 => HSYNC
6 => VSYNC
You can just connect all the grounds together or just the single ground, it works either way. Not sure if it really matters.
kNiTe-oWl
