I got a Original MailStation which seems to have a litte problem
I configured the Phone-Number and User-Data but when the MailStation
did try to dial it gets a "No DialTone".
The Phone-Line-Cable is OK ( the two inner contacts are conneted in the RJ-Connector) and
cliped into the Wall Port.
The modem did respond in the Diagnostics-Mode to Commands like AT H1, AT H0, AT &F, AT &W
and AT DT1234 if I switch off the "Wait for Dialtone" with AT X1...
I also configured it with a AT L3, but the Mailstation didnt find the Line
Can the Modem be defective in only the Line-Port and respond to the commands ?
The Relais did CLICK (by ATH1 / ATH0)....
Or did the MailStation (Original) use a non-standard Line-Cable ?
The phone on the Phone-Port did get a Dialtone too if the Line is connected
to the Wall-Port
Any Ideas ?