My equipment is the V5 IO from HSN. No epoxy. Badflash Bios installed.
custom badflash cable with IBM 1.4gb drive and have win98 cabs on HD. I have already done an FDISK and formatted with /S.
I am not booting.. Take a look below...
> Problem #2: The QNX that wouldn't die. There's an undocumented switch to
> FDISK. If the problem you describe is MBR-related, try FDISK /MBR to
> rewrite the MBR before rebooting. (Don't try this on a Linux box, just a
> DOS box!)
Is this a common problem with V5 IO? I formatted my HD with /s and when I
boot up, I can get into the bios, see the master is my IBM HD and secondary
is the sandisk.
The drive selection is C only and I set the drives up as
auto-auto.
But when I reboot, it just freezes after the bios info:
Award Bios v4.51PG
I-Opener Bios v5.0.0. (Patched)
Rise mP6 - PR266 CPU Found
Memory Test 30720 + 2048k
Detected IDE Primary Master - IBMXXXXX
Detected IDE Primary Master - Sandisk
And just stops until I power down. Do I need to do a FDISK /MBR and
reformat with /S to fix this problem??
Please help.. I will try all suggestions.
Thx,
Teksavy (or not so savvy today)
