OK first of all doyou have the latest drivesr for the IO??? it seems to improve the USB support a bit???
next do you have the latest drivers for the dsl modem??? yes no
and lastly if your using softfsb what are you clocking the FSB at????
66 or 100 i hope other numbers have been known to give problems. espeicaly ABOVE 100.
100fsb is a 33mhz PCI buss, this is exactly what the main controler chip with the USB and IDE ect.. and every thing else it has is supose to run at
33mhz.
to be honist you should use a switch to hardwire your FSB to 100mhz and soft clock your multiplyer ifyou got a k6+ safest and least amount of soldering.
you can run any processor that comes stock ith the iopner at 100mhz FSB. the multiplyer may need to be changed though via hardware. i.e. a winchip1 wil run just fine at 2x100 with out problems. ant about a 20% increase in cpu preformance i might add also.
as for the RISC couldnt tell ya but it SHOULD run at 100mhz fsb.
even the oldest of processors I'v found to run fine and stable at 100mhz fsb.
i use to run a 100mhz pentium at 1.5x100 for 150mhz worked just fine GOT HOT and needed good cooling but ran just fine.
