I-Appliance BBS
The Official Source for Internet Appliance Upgrades and Mods

Click Here!
BBS Main List | Sign In | Sign Up | Search | Help | Linux-Hacker.netReply to Thread | Printer |

Home / I-Opener Areas / I-Opener Technical Stuff
I Need Help, Can't Get IOPENER To Recognize My HD.
I have an IBM Travelstar(i think thats right) 10g, and the Iopener will not recognize the drive in the bios. What am I doing wrong?

New MessageI Need Help, Can't Get IOPENER To Recognize My HD. (modified 0 times) MackDaddy
Profile | Email
I have an IBM Travelstar(i think thats right) 10g, and the Iopener will not recognize the drive in the bios. What am I doing wrong?
06-11-2001 22:41:12

New MessageRE:I Need Help, Can't Get IOPENER To Recognize My HD. (modified 0 times) Ragnar
Profile
I assume that you are doing an auto detect once you get into the bios? Is the side of the ide cable with the red line on pin 1 side? A little more info would be helpful.
06-12-2001 00:03:16

New MessageRE:I Need Help, Can't Get IOPENER To Recognize My HD. (modified 0 times) MackDaddy
Profile | Email
I put the red on pin 1 does nothing, not even a spin up. I switch the cable and it spins up but the bios won't detect it and if i let i try to on boot it says there is none. The hard drive is an IBM travelstar model # DJSA-210 10gb.
06-12-2001 03:25:14

New MessageRE:I Need Help, Can't Get IOPENER To Recognize My HD. (modified 0 times) 02U2
Profile
Be sure your cable is oriented properly and FULLY seated. If that does not solve your problem it's possible you may have pulled a little to hard on your cable? Check the connections from the ribbon cable to the connector.
Test your harddrive on another working system to verify the harddrive works properly.
ALWAYS handle the harddrive by it's edges. Placing pressure in the center of the drive can ruin it!

AND OBSERVE ALL ESD PRECAUTIONS!

06-12-2001 04:09:31

New MessageRE:I Need Help, Can't Get IOPENER To Recognize My HD. (modified 0 times) MackDaddy
Profile | Email
I tested it on another comp(my tower) and it worked fine. don't know what happened when i put it in the iopener. won't work there. I think i have the ide cable correct.
06-12-2001 04:30:20

New MessageRE:I Need Help, Can't Get IOPENER To Recognize My HD. (modified 0 times) Programmer
Profile
the connection where it spins up is correct. what version is your IO? I recall hearing that v3 and earlier had detection problems. try doing a soft reboot after it has tried to detect the drive. It is possible that you have a bad or damaged cable, but it's somewhat more likely that your IO is being uncooperative.
06-12-2001 06:16:48

New MessageRE:I Need Help, Can't Get IOPENER To Recognize My HD. (modified 0 times) northstar
Profile | Email
Do you have the correct (crossed pair) iOpener IDE cable?
06-12-2001 08:29:32

New MessageRE:I Need Help, Can't Get IOPENER To Recognize My HD. (modified 0 times) MackDaddy
Profile | Email
The cables are correct, i got this to work once before with a different drive(hitachi). I have tried all kinds of ways to boot it and it will not detect it. I think it is a v2 or v1. It had a winchip 180 thats been upgraded to a winchip 2 200. still 32mb ram. Let me know what other info you need and I will get it up here. Thanks.
06-12-2001 13:10:27

New MessageRE:I Need Help, Can't Get IOPENER To Recognize My HD. (modified 0 times) redwood
Profile
bad memory here, but, methinks, Jack had a problem/solution like this.. I think, on some IBM drives, you will need to Enter the drive specs...they just won't autodetect.. but, they will work...
06-12-2001 20:07:07

Reply to Thread | Printer |
All times are PSTPowered by UltraBoard v1.62



Copyright © 2000, Netmake Inc. All Rights Reserved.
See Terms and Conditions for more information.




i-opener opener laptop notebook computer help drivers dll free windows dos repair fix linux mac macintosh 2000 95 98 nt pc configure hardware software sound video netscape explorer network networking lan wan software cmos fat bios printer card mouse modem ide scsi cd rom controllers scanner tape hard drive cgi scripts source code mp3