I-Appliance BBS The Official Source for Internet Appliance Upgrades and Mods Click Here! BBS Main List | Sign In | Sign Up | Search | Help | Linux-Hacker.net Reply to Thread | Printer |

Home / I-Opener Areas / I-Opener Technical Stuff Jailbait v6, Linksys USB100TX, programmer's pegasus.o and problems! Jailbait v6, Linksys USB100TX, programmer's pegasus.o and problems!

Jailbait v6, Linksys USB100TX, programmer's pegasus.o and problems! (modified 0 times) acer123 Profile I bought a Linksys USB100TX, hooked it up to my IO (version 1 IO), downloaded Jailbait V6 and installed it successfully. The Linksys was not recognized. I then searched through this board and found that Programmer had a pegasus.o file, so I dropped that into /lib/modules (moved the orignal one to /). I rebooted and still have the same issues. The errors that I receive are: usb.c: USB new device connect, assigned device number 2 usb.c: This device is not recognized by any installed USB driver. (My problem is very similar to that found in http://www.linux-hacker.net/cgi-bin/UltraBoard/UltraBoard.pl?Action=ShowPost&Board=technical&Post=1325&Idle=0&Sort=0&Order=Descend&Page=0&Session= ) I've exhausted my knowledge and research to this problem. Can anyone help me? Thanks in advance! -acer123 08-14-2001 07:25:36

RE:Jailbait v6, Linksys USB100TX, programmer's pegasus.o and problems! (modified 0 times) Perplexer Profile I too am having USB ethernet problems; I get: pegasus.c: v0.3.12 2000/05/22 (C) 1999-2000 Petko Manolov (petkan@spct.net) usb.c: registered new driver pegasus usb.c: USB new device connect, assigned device number 2 usb_control/bulk_msg: timeout usb_control/bulk_msg: timeout usb_control/bulk_msg: timeout usb_control/bulk_msg: timeout usb_control/bulk_msg: timeout usb.c: USB device not responding, giving up (error=-110) usb.c: USB disconnect on device -1 This happens with both the Linksys USB100TX and D-Link DSB-650. Any ideas? 08-14-2001 09:00:53

RE:Jailbait v6, Linksys USB100TX, programmer's pegasus.o and problems! (modified 0 times) Programmer Profile acer123: your problem is rather simple really.. you need a pegasus.o that knows your linksys. The one I modified was to allow the DSB-650 clear that I have to be recognized (device id 0xabc1) you can recompile the driver yourself, or if you'd like, get me the vendorID and DeviceID from the linksys and I'll compile the driver for you. alternately, you can open the driver in a hex editor, locate a compatible device/vendor and change it to match the device/vendor of your linksys. the vendor that I added in the pegasus.o that you downloaded from me is at offset 15e0, and is 2001 (though the bytes are swapped so it looks like 0120) and the device is at 15e2 and is abc1 (c1ab) perplexer: do your usb devices work under windows? you appear to be having a totally different problem. 08-14-2001 11:16:59

RE:Jailbait v6, Linksys USB100TX, programmer's pegasus.o and problems! (modified 0 times) acer123 Profile Programmer, Sorry to be a pain, but I cannot seem to find the vendor or device id. I have checked the board but cannot find any documentation on how to find this. Looking at the *inf file that was supplied with the Linksys USB100TX, I see the following information (I have included the entire file at the end (just in case): ;---------------- -------- --------- ;DisplayName Section DeviceID ;---------------- -------- --------- %Liksys.DeviceDesc% = Liksys.Ndi,USB\VID_066B&PID_2203 %Liksys.DeviceDesc% = Liksys.Ndi,USB\VID_066B&PID_400B Is this what you are looking for? I believe that the vendor id is 066B. Also, I don't have a Linux partition on my computer so, if you don't mind, could you recompile the pegasus driver for me? Again, thank you very much for your help and patience with this problem. -acer123 acer123@hotmail.com ; USB100TX.INF (for Win98) ; ; Copyright 1999, Linksys Corporation. ; Date : 17-May-2000 [version] CatalogFile = usb100tx.cat signature = "$Chicago$" Class = Net ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318} Provider = %Liksys% LayoutFile = layout.inf DriverVer=08/01/2000,2.05.0.0 [Manufacturer] %Liksys% = Liksys [ControlFlags] ExcludeFromSelect = \ USB\VID_066B&PID_2203 USB\VID_066B&PID_400B [Liksys] ;---------------- -------- --------- ;DisplayName Section DeviceID ;---------------- -------- --------- %Liksys.DeviceDesc% = Liksys.Ndi,USB\VID_066B&PID_2203 %Liksys.DeviceDesc% = Liksys.Ndi,USB\VID_066B&PID_400B ;;****************************** ;;10M/100M for Linksys ;;****************************** [Liksys.Ndi] AddReg = Liksys.Reg, Liksys.Params, Liksys.Config.Reg DeviceID = USB\VID_066B&PID_2203 DeviceID = USB\VID_066B&PID_400B CopyFiles=CopyFile.Sys ;******************************************************************************* ; Windows 98 registry section ;******************************************************************************* [Liksys.Reg] HKR,Ndi,DeviceID,,USB\VID_066B&PID_2203 HKR,Ndi,DeviceID,,USB\VID_066B&PID_400B HKR,Ndi,CardType,,"PNP" HKR,,AdapterName,,USB100TX HKR,,DevLoader,,*ndis,*ntkern,*ndis HKR,,DeviceVxDs,,USB100TX.sys ; NDIS Info HKR,NDIS,MajorNdisVersion,1,05 HKR,NDIS,MinorNdisVersion,1,00 HKR,NDIS,LogDriverName,,USB100TX ; Interfaces HKR,Ndi\Interfaces,DefUpper,,"ndis3" HKR,Ndi\Interfaces,DefLower,,"ethernet" HKR,Ndi\Interfaces,UpperRange,,"ndis3" HKR,Ndi\Interfaces,LowerRange,,"ethernet" ; Install sections ;;HKR,Ndi\Install,ndis3,,"Liksys.Install" HKR,Ndi,HelpText,,"Linksys USB Adapter" ;******************************************************************************* ; win98 Driver parameters ;******************************************************************************* [Liksys.Params] HKR, ,TxPacketDesc,, "28" ; 40 HKR, ,RxPacketDesc,, "14" ; 20 [Liksys.Config.Reg] HKR,Ndi\Params\MediaType,ParamDesc,,"Connection Type" HKR,Ndi\Params\MediaType,default,,"0" HKR,Ndi\Params\MediaType,type,,"enum" HKR,Ndi\Params\MediaType\enum,0,,"AutoSense" HKR,Ndi\Params\MediaType\enum,1,,"10BaseT" HKR,Ndi\Params\MediaType\enum,2,,"10BaseT Full_Duplex" HKR,Ndi\Params\MediaType\enum,3,,"100BaseTX" HKR,Ndi\Params\MediaType\enum,4,,"100BaseTX Full_Duplex" HKR,Ndi\Params\MediaType,flag,1,"20",00,00,00 HKR,Ndi\Params\FlowControl,ParamDesc,,"Flow Control" HKR,Ndi\Params\FlowControl,default,,"1" HKR,Ndi\Params\FlowControl,type,,"enum" HKR,Ndi\Params\FlowControl\enum,0,,"Enable" HKR,Ndi\Params\FlowControl\enum,1,,"Disable" HKR,Ndi\Params\FlowControl,flag,1,"20",00,00,00 HKR,Ndi\Params\FlowControl_Tx,ParamDesc,,"Flow Control Base Tx Packets" HKR,Ndi\Params\FlowControl_Tx,default,,"0" HKR,Ndi\Params\FlowControl_Tx,type,,"enum" HKR,Ndi\Params\FlowControl_Tx\enum,0,,"Disable" HKR,Ndi\Params\FlowControl_Tx\enum,1,," 1 Packet" HKR,Ndi\Params\FlowControl_Tx\enum,2,," 2 Packets" HKR,Ndi\Params\FlowControl_Tx\enum,3,," 4 Packets" HKR,Ndi\Params\FlowControl_Tx\enum,4,," 8 Packets" HKR,Ndi\Params\FlowControl_Tx\enum,5,,"16 Packets" HKR,Ndi\Params\FlowControl_Tx\enum,6,,"32 Packets" HKR,Ndi\Params\FlowControl_Tx,flag,1,"20",00,00,00 HKR,Ndi\Params\FlowControl_Rx,ParamDesc,,"Flow Control Base Rx Size" HKR,Ndi\Params\FlowControl_Rx,default,,"0" HKR,Ndi\Params\FlowControl_Rx,type,,"enum" HKR,Ndi\Params\FlowControl_Rx\enum,0,,"Disable" HKR,Ndi\Params\FlowControl_Rx\enum,1,," 1K" HKR,Ndi\Params\FlowControl_Rx\enum,2,," 2K" HKR,Ndi\Params\FlowControl_Rx\enum,3,," 4K" HKR,Ndi\Params\FlowControl_Rx\enum,4,," 8K" HKR,Ndi\Params\FlowControl_Rx\enum,5,,"16K" HKR,Ndi\Params\FlowControl_Rx\enum,6,,"32K" HKR,Ndi\Params\FlowControl_Rx,flag,1,"20",00,00,00 ;******************************************************************************* ; Install section for OSR2 and Windows 98 ;******************************************************************************* [CopyFile.Inf] USB100TX.inf [CopyFile.Sys] USB100TX.sys,,,2 ;------------------------- ; Destination directories ;------------------------- [DestinationDirs] CopyFile.Sys = 11 ; LDID_SYS ;------------------- ; Source Disk layout ;------------------- [SourceDisksNames] 50=%DriverDisketteName%,, [SourceDisksFiles] usb100tx.inf = 50,.,usb100tx.inf,10000 usb100tx.sys = 50,.,usb100tx.sys,10000 ;-------------------- ;Localizable strings ;-------------------- [Strings] Liksys= "LINKSYS" Liksys.DeviceDesc = "Linksys EtherFast 10/100 USB Network Adapter" DriverDisketteName = "Linksys USB Adapter Drivers Disk"  08-14-2001 11:39:21

I think that I found it (modified 0 times) acer123 Profile Looking at a thread: http://www.linux-hacker.net/cgi-bin/UltraBoard/UltraBoard.pl?Action=ShowPost&Board=technical&Post=1325&Idle=0&Sort=0&Order=Descend&Page=0&Session= I see this snippit: The way to check the ID's is to pull the USB plug and re-insert. JB6 will do a 'KAWETH Device Probe' that outputs the MfrID and DeviceID. It also tell you if your device is recognized. Granted, I don't really want the kaweth device driver, but I thought that I would try it and see what the output gave me. I unloaded the pegasus driver (rmmod pegasus) and installed the kaweth driver (insmod /lib/modules/kaseth.o). The output that I received was this: usb.c registered new driver kaweth Kawasaki Device Probe: 0x066b:0x400b So, does this mean that the vendor id is 0x066b and the device id is 0x400b Again, thanks for your help. -acer123 08-14-2001 12:00:54

THANK YOU!!!!!!!!!! (modified 0 times) acer123 Profile Programmer, Thank you for your help. I downloaded a Hex editor and modified the pegasus.o file that I downloaded from your site. I dropped the new pegasus.o file into /lib/modules (overwriting the original one) and BANG! it worked!@!!!!! Thank you very much for your help!!! (I'm glad that I went through all of this - I really learned a lot). -acer123 08-14-2001 17:10:27

RE:Jailbait v6, Linksys USB100TX, programmer's pegasus.o and problems! (modified 0 times) Programmer Profile Glad to have helped.. 08-15-2001 06:24:04

RE:Jailbait v6, Linksys USB100TX, programmer's pegasus.o and problems! (modified 0 times) Programmer Profile OK.. the http://bethie.net/~programmer/pegasus.o now contains the Linksys device mentioned in this thread. and http://bethie.net/~programmer/jbv6wnewpegasus.img contains said updated file. 08-15-2001 06:56:31

RE:Jailbait v6, Linksys USB100TX, programmer's pegasus.o and problems! (modified 0 times) Perplexer Profile Programmer, Both devices work under Windows; I have no idea why I am getting the timeouts under Jailbait v6. I searched the bbs and found no other posts with this problem. Thanks, Plex 08-15-2001 10:50:52

RE:Jailbait v6, Linksys USB100TX, programmer's pegasus.o and problems! (modified 0 times) Programmer Profile Perplexer: I did a search (google) and found lots of similar problems, the only one that seemed might make sense to me is an issue with IRQ Routing under 2.4.pre kernels. so, what's your USB sharing its IRQ with? 08-15-2001 11:25:15

RE:Jailbait v6, Linksys USB100TX, programmer's pegasus.o and problems! (modified 0 times) mrbug Profile acer123 i have the same card as you i would apriciate if you could send me the pegasus.o file by email it makes a long time i have the same problem as you now i find this thread and you fixed the problem! martin@bankers.ca 11-23-2001 07:36:17

RE:Jailbait v6, Linksys USB100TX, programmer's pegasus.o and problems! (modified 0 times) acer123 Profile I have installed the pegasus.o file and thought that I was good to go. I set up my IP address, network, gateway, etc in the files located in /etc/config. I rebooted, and it seems to boot fine. I am able to ping my IO ip address (the interface) but I cannot ping any other computer on the same network. Also, I cannot ping the IO from any other computer on the network. Also, no lights are lit on the Linksys or on the switch. I've been working on this for some time and can't seem to get it up and running. Any help would be appreciated. Thanks acer123 01-29-2002 07:13:10

RE:Jailbait v6, Linksys USB100TX, programmer's pegasus.o and problems! (modified 0 times) acer123 Profile OK. Here is some more information. dmesg shows this during boot up: ... usb.c: new USB bus registered, assigned bus number 1 usb.c: USB new device connect, assigned device number1 hub.c: USB hub found hub.c: 2 ports detected uhci.c: USB UHCI at I/O -0xe800, IRQ 15 uhci.c: detected 2 poarts usb.c: new USB bus registered, assigned bus number 2 usb.c: USB new device connect, assigned device number 1 hub.c: USB hub found hub.c 2 poarts detected ... Netpliance iOpener LED Driver (grep@doyle.net) pegasus.c: pegasus.c: v0.4.15 2000/11/7 (c) 1999-2000 Petko Manolov usb.c: registered new driver pegasus pegasus.c: eth0: Linksys USB100TX kmod: failed to exec /sbin/modprobe -s -k net-pf-4, errno = 2 <msg repeats 5 times> pegasus.c: eth0: link NOT established (0x7849) - check the cable. pegasus.c: eth0: set Rx mode pegasus.c: eth0: set Rx mode pegasus.c: eth0: set Rx mode kmod failed to exec...... <msg repeats 5 times> dmesg output ends here. After I log in, I run route -n and see the following output: 68.61.224.0 0.0.0.0 255.255.248.0 U 0 0 0 eth0 0.0.0.0 68.61.224.1 0.0.0.0 UG 0 0 0 eth0 I then add a default route (route add default eth0). This adds a third line to the output of my route -n This entry is actually second in the list. 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 eth0 What am I missing? THanks acer123 01-29-2002 10:40:35

RE:Jailbait v6, Linksys USB100TX, programmer's pegasus.o and problems! (modified 0 times) SpaceBass Profile Hey folks, I have the same problem that Acer had. I am using the Jailbait image referenced in Programmer’s earlier post. The Pegasus module sees the linksys but says it cannot establish a link/check the cable. I know the linksys works because I had it running under windows and ELX Linux (which will not boot on the IO). Has anyone found a fix for this? I am so close to getting the IO working…I’d love some help SpaceBass 02-28-2002 09:34:14

Reply to Thread | Printer | All times are PST Powered by UltraBoard v1.62

I-Appliance BBS General - NEWS, Breaking NEWS - linux-hacker.net BBS on CD Questions - User Groups in Your Town - E-Bay, Yahoo Auction LINKS ONLY (MODERATED) - Jokes & Humor - usdtv box I-Opener Areas - I-Opener General Posts - I-Opener Technical Stuff - I-Opener Technical Info Reference (MODERATED) WebSurfer Areas - WebSurfer General Posts - WebSurfer Technical Stuff - WebSurfer Technical Info Reference (MODERATED) Other I-Appliances - Virgin Webplayer - WebPal - MailStation - 3Com Audrey - ThinkNIC / Oracle NIC - Gateway/AOL Connected Touch Pad - Philips/AOL-TV - ACER NT-150 STB - MSN Companion - Compaq IA - Emachines IA - IBM NetVista IA - Intel dot.station - MSNTV2 Network Computers - Fujitsu-Siemens Scovery Linux Net Computers - GallantWeb Server Consoles - Dreamcast - xbox hacking Web Pads - Epods One General Post - Panasonic CF-01 - Fujitsu Stylistic 1200 - Cybiko Thin Clients - Thin Clients DigitalVideoRecorders - DTV Recorders, Replay, TiVo, Etc... - Tivo Hacks Linux - Midori Linux General Board - ITX MotherBoards Single Board Computers - Earth Computers mARMalade Elite Member Area MISC Areas - The Swap Meet WE TAKE NO RESPONSIBILITY FOR ANY TRANSACTION HERE AND NO COMMERCIAL POST PERIOD !!! - Wireless Net - Cameras - Robotics - Routers/Gateways - Mattel JuiceBox