I-Appliance BBS
The Official Source for Internet Appliance Upgrades and Mods		 Amazon Honor System Click Here to Pay Learn More
BBS Main List | Sign In | Sign Up | Search | Help | Linux-Hacker.netReply to Thread | Printer |

Home / I-Opener Areas / I-Opener Technical Stuff
Using Datel converter

New MessageUsing Datel converter (modified 0 times) recycler
Profile
Do I still need to lower the resistance of R302 when using the Datel converter?
04-10-2004 08:57:47

New MessageRE:Using Datel converter (modified 0 times) BadFlash
Profile | Email
If you are using the 5V unit taking power from the USB supply you don't need to.
04-11-2004 13:30:24

New MessageRE:Using Datel converter (modified 0 times) recycler
Profile
I am powering it from the USB, however I am also using the USB pad to power a mini 4 port USB hub. My total USB devices are drawing about 800mA.

The problem I am having is that windows keeps locking up soon after booting up, even if my K6III+ 450 is only set at 200MHz.

04-11-2004 21:11:11

New MessageRE:Using Datel converter (modified 0 times) BadFlash
Profile | Email
Your problem is not the 800 mils from the hub. Sounds like the CPU is overheating. Got a good fan on it? Have you checked the voltage? What version IOP is this? On V1-V3A you need to split the CPU voltage.
04-15-2004 16:41:01

New MessageRE:Using Datel converter (modified 0 times) recycler
Profile
I am using the TenMaxx IO fan. I can't remember exactly what temps since it has been a while since I tried using the machine, but they were all very low and well within normal limits (tested using MBM). I was also using Rain.

I checked the voltage before I ever put the CPU back in, and the temps were also the first thing I checked when the problem appeared. So I am baffled. It worked ok before the Datel converter.

04-16-2004 05:55:27

New MessageRE:Using Datel converter (modified 0 times) BadFlash
Profile | Email
I can't really say. Just double check your soldering. Could be that the voltage is pulling down under load. You removed Q16?
04-16-2004 18:47:27

Reply to Thread | Printer |
All times are PSTPowered by UltraBoard v1.62


Copyright © 2000, Netmake Inc. All Rights Reserved.
See Terms and Conditions for more information.




i-opener opener laptop notebook computer help drivers dll free windows dos repair fix linux mac macintosh 2000 95 98 nt pc configure hardware software sound video netscape explorer network networking lan wan software cmos fat bios printer card mouse modem ide scsi cd rom controllers scanner tape hard drive cgi scripts source code mp3