I-Appliance BBS
The Official Source for Internet Appliance Upgrades and Mods
Amazon Honor System Click Here to Pay Learn More
BBS Main List | Sign In | Sign Up | Search | Help | Linux-Hacker.netReply to Thread | Printer |

Home / I-Opener Areas / I-Opener General Posts
Linksys KVM Switch doesn't work with IOpener

New MessageLinksys KVM Switch doesn't work with IOpener (modified 0 times) rooster
Profile
I can't get the mouse to work with my KVM switch. Keyboard works fine, keyboard/mouse works fine when I switch to other CPUs. Tried different cables with no luck. The keyboard/mouse splitter on the IOpener works when directly plugged into a keyboard and mouse but not via the KVM. Stumped!

The KVM is a Linksys mini 4CPU KVM switch. IOpener is V3 w/JailBait.

Any ideas would be appreciated.
Thanks.

11-14-2001 17:42:39

New MessageRE:Linksys KVM Switch doesn't work with IOpener (modified 0 times) *SF*
Profile
I assume You are using reversed ports @ the switch.
I could never get a PS/2 mouse to work with a switch.
But a USB Mouse with a PS/2 adaptor seemed like it might.
11-14-2001 17:56:42

New MessageRE:Linksys KVM Switch doesn't work with IOpener (modified 0 times) Wild_Pencil
Profile | Email
Ditto, I never got the IOpener working with both Kbd+Mouse through my KVM Switch (Belkin OmniView). I never bothered to diagnose it further, since I have extra mice lying around in my lab.

I'm thinking there's a shared line between Kbd and Mouse (Keyboard Clock to Mouse Clock is my guess), and if this is true, I'm guessing that the IOpener doesn't like that arrangement at all. Other devices take it just fine -- I used the same setup to work a notebook with no problem.

-WP

11-14-2001 18:25:19

New MessageRE:Linksys KVM Switch doesn't work with IOpener (modified 0 times) Glitch
Profile
Strange... My i-Opener works fine with an Apex EL-480DT KVM switch. I used to have an Belkin OmniView and I'm pretty sure that it used to work with that also. I've sold the OmniView so I can't verify that it works.

I am using a Belkin keyboard/mouse Y-cable

http://catalog.belkin.com/IWCatProductPage.process?Merchant_Id=1&Product_Id=17096

The only thing that I did special was plug the mouse into the keyboard outlet and vice-versa (i.e. the same as when you hook a regular keyboard & mouse to the i-Opener).


Glitch
Electronics run on smoke, if you let the smoke out they won't work
11-14-2001 22:15:39

Reply to Thread | Printer |
All times are PSTPowered by UltraBoard v1.62



Copyright © 2000, Netmake Inc. All Rights Reserved.
See Terms and Conditions for more information.




i-opener opener laptop notebook computer help drivers dll free windows dos repair fix linux mac macintosh 2000 95 98 nt pc configure hardware software sound video netscape explorer network networking lan wan software cmos fat bios printer card mouse modem ide scsi cd rom controllers scanner tape hard drive cgi scripts source code mp3