I have seen reports of the following hardware from the meshap mailing list:
Note that the Mesh CD version is different than the "build" version.
Siemens Wireless PCI Adapter Model SS1024 CD v06 and F08
Netgear 802.11b Wireless PCI Adapter Model MA311 CD v06 and F08
Zoomair PCMCIA works at build 21.
Corega PCIA-11 (a Prism II PCI adapter), works with Mesh CD 06.
Siemens SpeedStream SS1024 works at Mesh CD 06
Linksys WUSB11 v2.5 and v2.6 work with build 21. Note: v2.6 uses the new Atmel chipset, so other newer USB devices may work, please report back.
Linksys PCI PCMCIA card adapter (WDT11) and a linksys 802.11b PCMCIA card (WPC11 v2.5), worked at Mesh CD 05, broken at Mesh CD 06, no reports after this.
Netgear 401 wireless (at about build 21 I think)
Dlink DWL120 USB adapter, works at Build 21 RC 02
Not working or needs testing:
D-Link DWL-520+ Not working CD v06 and F08
Orinico Wavelan (PCMCIA Gold or Silver card + PCI adaptor) Not working CD v06 and F08
SMC2402 PCI card is a TI chip and not supported yet (as of build 22)
D-Link DWL-650 PCI card (not the "plus", the report was on rev A2) is 3V PCI 2.2 only card, which won't work in older motherboards. Tests were not done.
D-Link DWL-650 "plus" PCI card not working as of Mesh CD 06.
PCI->PCMCIA adaptor with a Prism 2 based card and the ricoh based PCI to PCMCIA convertor wasn't supported ad Mesh CD 06.
Linksys WMP11 v2 7 is brooktree chip, no go on Mesh CD 06
"orinoco card - this doesn't work - error from orinoco_setup when modprobing orinoco_cs" at build 21
Intel AnyPoint II at build 21
Lee reports: "I've got the TI chip working with 2.4.18 mandrake, but not tried with
mesh box distor, the drivers work to a fashion but too well" - later e-mails show it's a binary only driver and won't work with mesh CD 06.
You may find some more wireless cards on linux info at http://www.linux-wlan.org
Thanks to all who posted reports to the list. It would be easier if you posted reports here from now on, what ever is easier for you.
MeshNet Project http://meshnet.sf.net