I-Appliance BBS
The Official Source for Internet Appliance Upgrades and Mods

Click Here!
BBS Main List | Sign In | Sign Up | Search | Help | Linux-Hacker.netReply to Thread | Printer |

Home / WebSurfer Areas / WebSurfer Technical Stuff
pcmcia cards
Using a pcmcia card drive.

New Messagepcmcia cards (modified 0 times) ckbone
I recently found an Action Tech isa/pcmcia card drive. The whole thing mounts in the isa slot with its access ports facing out the back. What I'm proposing here is enabling the on-board ide, and using the isa slot for the card. The card is too big to allow use of the pci slot with the card. Does this sound workable? I have several pcmcia cards(modem,LAN,hard drive) which could be used with this setup. Also, is anyone doing this port/resistor soldering job? I'm fairly certain I would have great difficulty with such a delicate operation.
05-24-2000 02:48:40

New MessageRE:pcmcia cards (modified 0 times) liar
uhh... the whole thing DOESN'T mount in an ISA slot, dummy. it needs a separate bay for the readers. If you are mounting a hard drive in it already, where the fsck are you going to put the reader?

liar

05-26-2000 17:10:29

New MessageRE:pcmcia cards (modified 0 times) tanker
liar
There are plenty of places to put the readers in a WS case. Maybe if you were not so
excited about finding an opportunity to insult someone you could actualy make a contribution to this post. But hay, what ever makes you feel like an adult, go right ahead!
05-26-2000 20:29:21

New MessageRE:pcmcia cards (modified 0 times) SpokeToSoon
I knew I had seen one before. This isn't the one I remember but it proves a point. :)

http://www.inside-usa.com/products/mm686data.htm

05-26-2000 21:10:31

New MessageRE:pcmcia cards (modified 0 times) ckbone
Funny....The isa/pcmcia card drive I have here in my hand, is a wholly self-contained unit...no extra cables,cards,etc. You plug it into an isa slot, and its access port is open on the back of the slot. I know there are pcmcia drives that require a slot and an available open drive bay....this card, however, only requires one isa slot. If you could get your IDE working on-board, or using the pci slot, this card drive could be easily used for multiple devices, many of which are just sitting around, such as the four or five I have. I have a new modem/LAN combo card that would work great. Any "help" in this matter is appreciated. And by-the way, the interal hard-drive I'm using does not block the slots...amazing what you learn....if you can read.
05-27-2000 03:23:30

New MessageRE:pcmcia cards (modified 0 times) ms662412
The only reason that the card that some one specified requires 2 bays is because it can handle Type 3 PCMCIA Slot Cards. You don't really need this if all you have is Type 2 Slots. If some one would have taken alittle more type to study the device, they would know this.
L8tr
05-27-2000 07:45:23

New MessageRE:pcmcia cards (modified 0 times) ma662412
Also,
All he's looking for is a reader not a All in Wonder gizmo like that
05-27-2000 07:46:20

New MessageRE:pcmcia cards (modified 0 times) ckbone
I already have this device. It uses one isa slot. It has two slots in it, so you can use a type 3 device, or two type 2 devices. It is only a card drive....unlike the one pictured in the link. I was trying to find out if it could be used in this Surfer. It is probably too thick to allow use of the pci slot at the same time, so I would have to use the on-board ide. I use pcmcia cards all the time in my Thinkpad......but I have no experience with pcmcia drives in desk-top computers. If it could be done, modems, Lan connections, etc., would be a breeze. The documentation I have for it obviously does not cover Surfers. Very few people seem to know anything about the thing, but it fits, and looks like it should work.
05-27-2000 10:39:37

New MessageRE:pcmcia cards (modified 0 times) Prosaik
Check out my post in the Smart Card Reader/Writer thread for a possible solution to using PCMCIA cards (though no Type II capability).
05-31-2000 23:44:19

New MessageRE:pcmcia cards (modified 0 times) Prosaik
Profile
Check out my post in the Smart Card Reader/Writer thread for a possible solution to using PCMCIA cards (though no Type III capability).
05-31-2000 23:47:46

New MessageRE:pcmcia cards (modified 0 times) Linuxguru
To ckbone: I have used a Greystone Peripherals dual Type-III card dock in a desktop computer. It has an ISA card and a separate card dock unit that fits in a 5.25" slot. I have used Type-III hard disks in it, and they were seen by Linux without any problems. With an entry in fstab, I was easily able to mount and read/write to an msdos filesystem on the Type-III hard disk. I think that you will be able to do the same with your card (if the chipset is supported by Linux - i82365 or the Cirrus Logic equivalent should be OK). In short, it is a simple and versatile addition to the websurfer. Enjoy and thanks for the heads up!

-Linuxguru

06-02-2000 01:33:48

Reply to Thread | Printer |
All times are PSTPowered by UltraBoard v1.62



Copyright © 2000, Netmake Inc. All Rights Reserved.
See Terms and Conditions for more information.




i-opener opener laptop notebook computer help drivers dll free windows dos repair fix linux mac macintosh 2000 95 98 nt pc configure hardware software sound video netscape explorer network networking lan wan software cmos fat bios printer card mouse modem ide scsi cd rom controllers scanner tape hard drive cgi scripts source code mp3