Quick Scovery Page
Monitor Not Included
Scovery Specs
Front View the card reader and ir parts are missing but would be easy to add your own smart card reader the com2 is on the mother board by the front of the case
Here is the back of the unit you get 10/100 base-t kb/mouse 1-serial 2-usb 1-lpt 1-vga
Inside shot of the case (i added the hd) there is room for a floppy (must remove sandisk board) a cdrom and harddrive i guess you can add 2 hd on under the floppy drive. there are 2 pci slots one open dimm slot, and i looks like you can upgrade the cpu just no info on the jumper settings yet...
mother board top left connector is floppy the to ide's are on the left above the power connector. the sound and mb monitor chips are not installed..
ok here is the sandisk board same chips set as the iopener, this is a great way to flash your iopeners just plug it in your pc (it has a standard 40 pin ide header on it) load the old version of the iopener sw and the bios flasher and plug it in the io easier than using a hard drive..
You can also swap the feet and get a vertical case
the included keyboard is nice but the cable is not to flexable the mouse is a standard Logitech 2 button
Bottom line
MAKE SURE YOU CHECK THE POWER SUPPLY VOLTAGE SWITCH IT COMES SET FOR 220V
and change the keyboard mapping in the X setup (thanks r0de i forgot that)
This is a very cool machine after plugging it in and setting the ip, dns and gateway to my network i was on the net with netscape
codeman
Where to get one ?? www.egghead.com on auction do a search for scovery looks like they do about 5-11 units a day